Standard range of products

Product
Standard
Weld Metal Analysis
Applications
Mechanical Properties
Nicro HLS
AWS: E NiCrFe – 3

DIN 1736:EL – Ni Cr 19 Nb

EN ISO 14172: E Ni 6082

Recovery: 145%

Current: = (+)

C: 0,03 – 0,06

Ni: 62,0 – 67,0

Cr: 18,0 – 21,0

Mn: 4,0 – 6,0

Fe: 3,0 – 5,0

Nb: 2,0 – 2,8

Basic-coated electrode for joining and overlaying. For all positions except vertical down. Suitable for materials of same kind as well as different kind at working temperatures from – 196 ºC up to 650 ºC.

The weld deposit is fully austenitic and does not embrittle.It is chemically resistant and also resistant to thermoshock, heat scale resistant up to 1300 ºC in low sulphurous atmosphere.
No carbon diffusion at higher temperatures.

Suitable for following base materials:
1.4876, (Incolloy 800M), 2.4870, 2.4867, 2.4816, 1.5662, 1.4429, 1.4539, 1.4922, 1.4988, H II, St E 255, St E 355 , T St E 460, further for joining of the mentioned materials with each other.

T: 620 – 650 N/mm²

Y: 390 – 430 N/mm²

E(1=5d): 35 – 45 %

I: 70 – 90 Joule

Table separator
Nicro Mn
AWS: E NiCrFe – 3

DIN 1736: EL – NiCr 19 Nb

EN ISO 14172: E Ni 6082

Recovery: 100%

Current: = (+)

C: 0,03 – 0,06

Ni: 62,0 – 67,0

Cr: 18,0 – 21,0

Mn: 4,0 – 6,0

Fe: 3,0 – 5,0

Nb: 2,0 – 2,8

Basic-coated electrode for joining and overlaying. For all positions except vertical down. Suitable for materials of same kind as well as different kind at working temperatures from – 196 ºC up to 650 ºC.

The weld deposit is fully austenitic and does not embrittle.It is chemically resistant, and alos resistant to thermoshock, heat, scale resistant up to 1300 ºC in low sulphurous atmosphere.

Suitable for following base materials:
1.4876, (Incolloy 800M), 2.4870, 2.4867, 2.4816, 1.5662, 1.4429, 1.4539, 1.4922, 1.4988, H II, St E 255, St E 355 , T St E 460, further for joining of the mentioned materials with each other.

T: 620 – 650 N/mm²

Y: 390 – 430 N/mm²

E(1=5d): 35 – 45 %

I: 70 – 90 Joule

Table separator
NiTi 3
AWS: E Ni – 1

DIN 1736: EL NiTi 3

EN ISO 14172: E Ni 2061

Recovery: 100%

Current: = (+)

C: 0,02 – 0,04

Ni: 93,0 – 95,0

Ti: 2,0 – 3,0

Al: 0,5 – 1,0

Mn: 0,3 – 0,7

Si: 0,3 – 0,7

Special electrode for welding of pure nickel and nickelclad steel sheet and joining of pure copper and copper alloys with unalloyed and stainless steel. Brazing cracks will definitly not occur.

Suitable for following base materials:
Ni 99.8, Ni 99.2, NiMn 1, NiMn 2.

T: 400 – 450 N/mm²

Y: 300 – 350 N/mm²

E(1=5d): 30 – 40 %

I: 160 – 200 Joule
Table separator
NiCu 30
AWS: E NiCu – 7

DIN 1736: EL – NiCu 30 Mn

EN ISO 14172: E Ni 4060

Recovery: 100%

Current: = (+)

C: 0,02 – 0,04

Ni: 62,0 – 65,0

Cu: 29 – 31,0

Fe: 0,5 – 1,5

Ti: 0,3 – 0,6

Suitable for joining and surfacing of nickel – copper alloys. The same base materials are employed in high grade plant engineering like chemical and petrochemical industries.

Suitable for following base materials:
NiCu 30 Fe, NiCu 30 Al, NiCu 14 FeMo

T: 450 – 550 N/mm²

Y: 300 – 350 N/mm²

E(1=5d): 29 – 32 %

I: > 120 Joule

Table separator
Metalloy C
AWS: E NiCrMo5

DIN 1736:EL-NiMo 15Cr 15W


EN ISO 14172: E Ni 6276

Recovery: 170%

Current: = (+)

C: max. 0,08

Ni: 56,0 – 60,0

Cr: 14,0 – 16,5

Mo: 15,0 – 17,0

Fe: 5,0 – 6,0

W: 3,0 – 4,5

Co: 2,5 – 3,5

Coated Electrode for overlays on hot working tools like hot shear blades and hot cutting dies. This special alloy is particularly recommended for the use in chemical industry due to its high resistance in aggresive media.

Also suitable for large sized overlays on steel and nickel alloys subject to impact, presure, and abrasion at high temperatures. Larger workplaces should be pre heated up to ~ 300 ºC.

T: 680 – 750 N/mm²

Y: 380 – 430 N/mm²

E(1=5d): 8 – 12 %

________

H: 220 – 400

Table separator
Metalloy 625
AWS: E NiCrMo3

DIN 1736:
EL- NiCr 20 Mo 9 Nb

EN ISO 14172: E Ni 6625

Recovery: 170%

Current: = (+) / ~

C: 0,02 – 0,04

Cr: 20,0 – 23,0

Mo: 8,0 – 10,0

Nb: 2,0 – 4,0

Ni: 58,0 – 65,0

Special electrode for welding of nickel alloys and joint welds of different kind of steels.

Base materials: Ni-Cr-Mo alloys and their combinations with low alloyed and high alloyed steels. austenitic steel with highest resistance to corrision for working temperatures of more than 300 ºC.

Suitable for following base materials:
2.4618, 2.4856, 2.4619, 1.4539, 1.4529, 1.5662

T: 780 – 800 N/mm²

Y: 450 – 500 N/mm²

E(1=5d): 30 – 35 %
Table separator

Latest News

Pages

Categories

  • No categories

Little About Us

Hello Read More »

Cheap Jerseys Cheap Jerseys/ Cheap Jerseys Cheap Jerseys Cheap Jerseys Cheap Jerseys Cheap Jerseys Cheap Jerseys Cheap Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys Wholesale Jerseys